When we think of finishing or preparing the walls of a house for painting, undoubtedly the most practical and economical option is the use of plaster. After all, it is not necessary to apply sealers, it can be applied directly to the concrete, dries faster than the putty and the service can be completed in less time.

Evaluate and prepare the wall

The first step in applying plaster is to check the wall structure. It should be flat with no burrs or holes. Block or plastered walls must wait seven days after their elevation for the plaster to be applied. For concrete surfaces, the deadline is 28 days. At this stage, it is essential to evaluate all hydraulic, electrical and air conditioning infrastructure, so that you do not need repairs after finishing. The window frames must be installed and the stops secured to the masonry polished plastering.

Prepare the plaster

The plaster needs to be prepared in a trough, in the proportion of 40 kg of plasterpackages usually marketedfor, on average, 36 liters of water. It takes about twenty minutes to prepare, dissolve the powder and rest the dough. Get the most of the same as you click here now.

Applying the plaster

First we need to wet the walls. Starting from the ceiling with a PVC player, then move to the walls, which must be made from top to bottom. The thickness should be one to three millimeters. Apply the second and third coat carefully until the surface is smooth and even. For corner application, the expert recommends using the corner trowel for better leveling and perfect finishing. To do this, position the spatula in the corner of the wall and descend straight. Repeat until the surface is smooth.

Finalization

In order for the work to be completed, it is necessary to check that the walls have not been corrugated. They should look a little shiny and the corners need to be even. Cleaning needs to be done at the end of work to prevent plaster from mixing with other materials. Disposal of residual plaster needs to be done separately from other debris.

Are you renovating and were you surprised by a wall infiltration? Or did it come up for no apparent reason? Whatever the causes, you need to know how to deal with the problem. Fortunately, there are certain methods to contain their effects and decrease the chances of occurring more often in the future.

An infiltration into the wall can ruin the property and devalue it as it damages mortars and paint. It often happens most often in humid rooms, such as bathrooms and kitchens, and outside because of rain.

If all the correct construction steps have been followed, you are unlikely to experience infiltration problems. However, it is common for us to buy ready-made real estate where such care may not have received proper attention.

Find out where the infiltration is coming from

The first step in solving any problem is to identify its source. This also goes for the process of stopping wall infiltration. Find out the source of the water by analyzing the areas around the wall that are suffering from the problem. For example, the problem may occur due to misplaced gutters or broken roof tiles. Another possibility is leaking damaged pipes.